Avaya PARTNER Advanced Communications System - B Special Characters

B-1
B
Special Characters B
You can add special characters for System Speed Dial numbers, Personal Speed Dial numbers,
and Auto Dial numbers (see Table B-1).
Special characters cannot be used when dialing a number manually.
Table B-1. Special Characters
Function Button Display Description
Pause h P Inserts a 1.5-second pause in the dialing sequence to wait
for a response, such as a dial tone or computer voice
message.
Recall S R Sends a timed switchhook flash needed to alert the system
on the other end (such as a PBX or Centrex system), and to
use some local telephone company custom calling features
(such as Call Waiting). Use Recall only as the first entry in an
Auto Dial or Speed Dial number. T1 lines ignore Recall.
Stop ! S Stops the dialing sequence until the Auto Dial button or
Speed Dial number is used again (for example, so the user
can enter additional digits, such as a credit card number or
password). To continue, press the Auto Dial button or
f
and the two- or three-digit Speed Dial code. (Stop cannot be
programmed from an MLC-6 or a TransTalk 9000-series
phone, since it has no
! button.)
Touch-Tone
Enable
& T Sends touch tones over a rotary line, to electronic equipment
such as answering machines and bank computers.
Do not use special characters with the Cell Phone Connect and Remote Call Forwarding
features.