Programming System Options
Toll Call Prefix (#402)
4-65
Toll Call Prefix (#402) 4
Use this feature to indicate whether users must dial a 0 or 1 before the area code to make a long-
distance call, or just the area code and number (this feature is not available for the Hong Kong
Release 3.0 version). Set Toll Call Prefix to reflect the dialing patterns of your local telephone
company.
Considerations 4
This feature affects the operation of dialing restrictions and permissions.
Programming 4
To change the Toll Call Prefix setting:
1. Press
f00ss#402 at extension 10 or 11.
2. Press
D until the appropriate value appears:
■ 1 = 0 or 1 required before Area Code and Number (the factory setting)
■ 2 = Area Code and Number Only
3. Select another procedure, or exit programming mode.
Transfer Return Programming 4
By the factory setting, transferred calls return to the originating extension if they are not answered.
However, you can program the transferred call to return to another extension. And you also can
program the number of times a transferred call rings before it returns to an extension. Program the
following features for Transfer Return:
■ Transfer Return Extension
■ Transfer Return Rings
To Next Page
Loading...
