Avaya PARTNER Advanced Communications System - System Speed Dial

Programming System Options
System Speed Dial
4-63
Programming 4
To reset the system, press
f00ss#728 at extension 10 or 11.
A display similar to the following appears:
Reset - Save All
When the reset is completed, the system is no longer in Programming Mode and the date and time
appear on the display.
System Speed Dial 4
Program a list of up to 100 frequently-dialed numbers for the system by using System Speed Dial.
After you have programmed the numbers, anyone on the system can dial a System Speed Dial
number by pressing
f (or # at intercom dial tone on a single-line telephone) and the three-
digit code, from 600 through 699, for that number. You can mark System Speed Dial numbers to
override dialing restrictions.
A System Speed Dial number can be up to 28 characters in length and can consist of the digits
0–9,
*, #, and the special dialing characters (see Appendix B, “Special Characters”). You assign
the number to one of the codes 600 through 699.
Considerations 4
■ For instructions on entering special characters (such as Pause) in a number, see Appendix B.
■ You can store account codes as System Speed Dial numbers for use with the Account Code
Entry feature.
■ A System Speed Dial number can begin with a star code; the system automatically inserts a
delay based on the Star Code Dial Delay (#410) setting. To program, enter a Pause followed
by the star code and the telephone number. (For example, press
h*675551001.)
■ To program System Speed Dial numbers that override dialing restrictions, mark them by
entering a star
* before the telephone number. Marked System Speed Dial numbers appear
on the SMDR call report as
f nnn, where nnn is the Speed Dial code. The digits in a
Marked Speed Dial number do not appear on displays.
■ A Marked System Speed Dial number can begin with a star code. To enter it, press *
followed by the star code and the telephone number. (For example, press
**675551001.)
■ You cannot program System Speed Dial codes on Auto Dial buttons.
■ You can program System Speed Dial numbers only from extension 10 or 11, but you can use
them from any extension.