Avaya PARTNER Advanced Communications System - Caller ID Call Log Line Association (#318); Release 2.0 or Later

Programming System Options
Caller ID Programming
4-13
Caller ID Call Log Line Association (#318)—
Release 2.0 or Later
4
Use this feature to associate lines with extensions for the purposes of logging unanswered Caller
ID calls. You can associate multiple lines with an extension and multiple extensions with the same
line. Caller ID calls can be logged only if they ring on an extension that is associated with a line
that has been programmed for Call Logging.
Considerations 4
■ Use Caller ID Call Log Line Association to associate lines with the one extension that will
log all calls. Then use Caller ID Log All Calls (#319) to allow the extension to log all Caller ID
calls on the associated lines.
■ It is not necessary to associate lines and extensions to log unanswered transferred calls.
Unanswered transferred calls are logged automatically.
Programming 4
To associate a line with an extension for the purpose of logging Caller ID information:
1. Press
f00ss#318 at extension 10 or 11.
2. At the extension prompt, enter the number of the extension to be programmed.
3. At the Line prompt, enter the two-digit line number to be associated with the extension.
4. Press
D until the appropriate value appears:
■ 1 = Assigned (line is associated with an extension or the extension is associated with a
line)
■ 2 = Not assigned (line is not associated with an extension; the factory setting) . Do one
of the following:
— To associate another line with this extension, press n or p until the line
number appears on the display. Then repeat Step 4.
— To associate another extension, press
N or P, and begin at Step
2.
5. Select another procedure, or exit programming mode.
Caller ID Call Log Line Association is available on 24-character PARTNER-18D and -
34D display telephones. It is not available for MLS, MLC, Transtalk 9000-Series, or tip/
ring telephones.