Programming System Options
Outside Conference Denial (#109)
4-49
Programming 4
To change the Line Coverage setting for an extension:
1. Press
f00ss#208 at extension 10 or 11.
2. Enter the desired line number.
3. Enter the number of the extension to be assigned ownership of the line.
4. Do one of the following:
■ To delete the current setting, press r.
■ To program another line, press n or p until the line number appears on the
display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
Outside Conference Denial (#109) 4
Use this feature to determine if users can include more than one outside party in a conference call.
Considerations 4
■ This feature setting applies to all system users.
■ A conference call connects up to five parties (including the conference originator). If outside
conference is allowed, you can have up to two outside parties and up to three inside parties. If
outside conference is disallowed, you can have one outside party and up to four inside parties.
Programming 4
To allow or disallow conferences with two outside parties:
1. Press
f00ss#109 at extension 10 or 11.
2. Press
D until the appropriate value appears:
■ 1 = Allow conference calls with up to two outside parties (the factory setting)
■ 2 = Disallow conference calls with two outside parties
3. Select another procedure, or exit programming mode.
To Next Page
Loading...
