Avaya PARTNER Advanced Communications System - Programming; Using Recall on a System Telephone; Using Recall on a Single-Line Telephone

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Recall (F03)
8-54
■ You can press S to insert a Recall signal in an Auto Dial or Speed Dial number, provided
it is the first character in the stored number.
■ Recall is ignored on T1 lines.
Programming 8
To program a Recall button:
1. Press
f00.
2. Press a programmable button.
3. Press
f03.
4. Program another button for this extension, or exit programming mode.
Using Recall on a System Telephone 8
To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the programmed button or
f03.
2. Enter the access code for the feature (if required).
3. To return to your original call, press the programmed button or
f03 again.
Using Recall on a Single-Line Telephone 8
To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the switchhook (or press the Recall or Flash button on a feature telephone that has
one).
You hear intercom dial tone.
2. Press
#03.
3. Enter the access code for the feature (if required).
4. To return to your original call, press the switchhook (or press the Recall or Flash button on a
feature telephone) again.