Avaya PARTNER Advanced Communications System - Group Pickup (I66 G); Considerations; Programming; Using Group Pickup on a System Telephone

Programming & Using Telephone Features
Group Pickup (I66G)
8-45
Group Pickup (I66G) 8
Use this feature to answer any outside, intercom, or transferred call ringing at an extension in a
Pickup Group (where G is a Pickup Group number from 1–4). In other words, when a call rings
at an extension that is in a Pickup Group, you can answer the call at any extension without
knowing which extension or line is ringing and without being in the same Pickup Group. The
system can have up to four Pickup Groups.
Considerations 8
■ Extensions can be in more than one Pickup Group.
■ You can program a Group Pickup button on a system telephone to pick up calls in a Pickup
Group with one touch.
Programming 8
To program a Group Pickup button:
1. Press
f00.
2. Press a programmable button.
3. Press left
i66.
4. Dial a Pickup Group number (1–4).
5. Program another button for this extension, or exit programming mode.
Using Group Pickup on a System Telephone 8
To use the Group Pickup programmed button, press the button.
To use Group Pickup manually:
1. Lift the handset and press
i.
You hear intercom dial tone.
2. Dial
66 and a group number (1–4) to pick up a call ringing at any extension in the group.
Using Group Pickup on a Single-Line Telephone 8
To use Group Pickup:
1. Lift the handset.
You hear intercom dial tone.
2. Dial
66 and a group number (1–4) to pick up a call ringing at any extension in the group.