Programming System Options
Copy Settings (#399)
4-17
Copy Settings (#399) 4
Set up your system by programming one extension for each type of telephone in the system. Then
use Copy Settings (#399) to program other telephones of the same type. For example, you can
program one PARTNER-18D telephone and then copy its settings to any other extensions that
have PARTNER-18D or PARTNER-18 telephones.
Use this feature to copy all of the following settings from one extension to another:
Considerations 4
■ This procedure is skipped in the sequence of programming procedures when cycling. To use
this procedure, enter the code (#399) directly.
■ Pooled extension settings can be copied to key extensions, except for extension 10. Key
extension settings can be copied to pooled extensions.
■ #116 Call Coverage Rings (Release
2.0 only)
■ #117 VMS Cover Rings (Release 2.0
and earlier)
■ #301 Line Assignment
■ #302 Line Access Restriction
■ #303 Display Language
■ #304 Automatic Extension Privacy
■ #305 Abbreviated Ringing
■ #307 Forced Account Code Entry
■ #308 Distinctive Ring
■ #309 Intercom Dial Tone
■ #310 Automatic VMS Cover
■ #311 External Hotline
■ #312 Voice Interrupt On Busy
■ #313 Line Access Mode Line
Ringing
■ #314 Pool Extension Assignment
■ #315 Pool Access Restriction
■ #316 Call Waiting
■ #317 Caller ID Call Logging and
Dialing (Release 2.0 and later)
■ #318 Caller ID Log Answered Calls
■ #320 Call Coverage Rings (Release
3.0 and later)
■ #321 VMS Cover Rings (Release 3.0
and later)
■ #401 Outgoing Call Restriction
■ #405 Disallowed List Assignments
■ #408 Allowed List Assignments
■ #501 Pickup Group Extensions
■ #502 Calling Group Extensions
■ #504 Night Service Group
■ #505 Hunt Group Extensions
■ #601 Fax Machine Extensions
■ #607 AA Extensions
■ #612 Contact Closure Group
■ Automatic Line Selection
■ Line Ringing
To Next Page
Loading...
