Avaya PARTNER Advanced Communications System - Setting the Date, Day, and Time; Considerations; System Date (#101)

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Setting the Date, Day, and Time
3-10
Setting the Date, Day, and Time 3
After supplying power to the control unit, use the following procedures to set the system clock:
■ System Date (#101) to set the month, day, and year
■ System Day (#102) to set the day of the week (for Release 2.0 and earlier systems)
■ System Time (#103) to set the hour and minutes
■ Automatic Daylight/Standard Times (#126) to automatically update the system clock
Considerations 3
■ Backup Programming—Automatic (#123) uses the System Date and System Time to
schedule the automatic backups.
■ Backup Programming—Automatic (#123) and Backup Programming—Manual (#124) do
not back up the System Date, the System Day, or the System Time.
■ Restore Programming (#125) does not restore the System Date, System Day, or System
Time.
■ Be sure that the System Date, System Day, and System Time are set correctly before using
backup procedures.
System Date (#101) 3
Use this feature to set the month, day, and year. The system displays only the month and day on
display telephones when the telephone is idle; the month, day, and year print on SMDR call
reports.
Considerations 3
■ The System Date date-stamps the backup files when you use Backup Programming.
Turn this feature off if you live in an area without daylight savings time.