Avaya PARTNER Advanced Communications System - Display Language (#303); Programming; Considerations

Programming System Options
Display Language (#303)
4-29
Programming 4
To program Direct Inward Dialing (DID), you must use the PARTNER ACS R6.0 PC Administration
software.
Display Language (#303) 4
Use this feature to change the language in which display messages appear if the extension has a
system display telephone. The language is set for each extension, so telephones in the same
system can display different languages.
Considerations 4
If SMDR is used, the call report header is printed in the language specified for extension 10.
Programming 4
To change the Display Language setting for an extension:
1. Press
f00ss#303 at extension 10 or 11.
The current Display Language displays.
2. Enter the number of the extension to be programmed.
3. To change the Display Language, press
D until the appropriate value appears.
■ 1 = English (the factory setting) 
■ 2 = Spanish
■ 3 = French
4. To program another extension, press
n or p until the extension number appears
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.