PARTNER
®
Advanced Communications System Installation, Programming, and Use
Music-On-Hold
9-32
■ If Ring on Transfer (#119) is Not Active and Music-On-Hold is Active, transferred callers
hear Music-On-Hold until the call is answered.
■ If Music-On-Hold is Active, users with system telephones with speakers can play
Background Music through their telephones’ speakers.
■ If Automatic System Answer is on, callers hear Music-On-Hold while waiting for someone
to answer the call.
■ If Direct Extension Dial is on, callers hear ringing when the call is transferred regardless of
the settings for Music-On-Hold and Ring on Transfer (#119).
■ If the operator at extension 10 uses the Wake Up Service Button (#115) to schedule wake up
calls, the recipients hear Music-On-Hold when they answer their wake up calls.
Programming 9
To change the setting of the Music-On-Hold jack:
1. Press
f00ss#602 at extension 10 or 11.
2. Press
D until the appropriate value appears:
■ 1 = Active (the factory setting)
■ 2 = Not Active
3. Select another procedure, or exit programming mode.
Music-On-Hold Volume (#614) 9
Use this feature to select one of seven volume settings for the external music source provided
through the Music-On-Hold jack on the processor module. This setting is system-wide.
Considerations 9
■ Changes to the Music-On-Hold Volume setting have immediate effect on all calls currently
receiving Music-On-Hold treatment.
Programming 9
To change the Music-On-Hold Volume setting:
1. Press
f00ss#614 at extension 10 or 11.
The display shows the current setting.
2. Press the number of the setting on the dialpad, or press
D or d until the correct
setting appears. (Setting ranges from 1 to 7, with 4 being the factory setting.)
3. If you want to return the volume to the default setting, press r.
To Next Page
Loading...
