Programming & Using Telephone Features
Conference Drop (F06)
8-31
Conference Drop (F06) 8
Use this feature to drop the last outside party added to a conference call without disconnecting the
other parties.
Considerations 8
■ You can program a Conference Drop button on a system telephone to use the feature with
one touch.
■ This feature cannot be used with Call Screening (F25).
Programming 8
To program a Conference Drop button:
1. Press
f00.
2. Press a programmable button.
3. Press
f06.
4. Program another button for this extension, or exit programming mode.
Using Conference Drop on a System Telephone 8
Press the programmed button or
f06. The last-added outside party is dropped from the
conference.
Using Conference Drop on a Single-Line Telephone 8
Press the switchhook down once rapidly. The last-added party (inside or outside) is dropped from
the conference.