Avaya PARTNER Advanced Communications System - Display

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Display
6-14
Display 6
PARTNER display telephones have a 2-line, 24-character (per line) adjustable display area for
calling and programming feedback. Specifically, the display shows:
■ Current date (excluding year), day, and time when the telephone is idle.
■ Account code, as it is entered.
■ Number dialed when making a call.
■ Duration of call (call timer).
■ Number (and name if programmed) of the extension calling when receiving an intercom call or
transferred call.
■ Number (and name if programmed) of the extension returning a transferred call when no one
answers at the destination extension.
■ Automated Attendant, Voice Messaging System, or Direct Extension Dial when a
call is transferred from an auto attendant, a voice messaging system, or the Direct Extension
Dial feature, respectively. Transfer from Auto Att, Transfer from VMS, or Transfer
from Direct Extension Dial if a call is returning to your extension after an unsuccessful
transfer by an auto attendant, a voice messaging system, or the Direct Dial Extension
feature, respectively.
■ Caller ID number (or name) of calling party, if applicable.
■ Caller ID number and name of calling party (Release 4.0 and later systems), if applicable,
while the call is ringing.
■ Direct In Dial (on 24-character displays) or DID (on 16-character displays) for incoming
calls on T1 lines with Direct Inward Dialing (DID). Caller ID is unavailable on T1 lines.
■ Coverage Call for XX on the display of users receiving a coverage call (XX represents the
number of the extension that activated call coverage).
■ Forward xx xx on the display of users forwarding their calls. (The first xx represents the
number of the user’s extension; the second xx represents the number of the destination
extension.)
■ Wake Up Call on the display of users receiving a wake up call.
■ Volume or display contrast level bars, as volume or display contrast is adjusted.
■ Programming messages and prompts when in programming mode.
■ When you are in Telephone Programming mode, the current line assignment, feature code, or
Speed Dial number (if any) assigned to a button displays when the button is pressed. Blank
displays if nothing is programmed.