Avaya PARTNER Advanced Communications System - Using Call Forwarding on a System Telephone; Using Call Forwarding on a Single-Line Telephone

Programming & Using Telephone Features
Call Forwarding/Call Follow-Me (F11,XX,XX)
8-13
Using Call Forwarding on a System Telephone 8
To forward calls manually:
1. Press
f11.
2. Dial your extension number.
3. Dial the extension number at which you want the calls to ring.
To remove Call Forwarding manually:
1. Press
f11.
2. Dial your extension number twice.
To forward calls using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed on the button, Call
Forwarding is activated (on a button with lights, the green light is on). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination extension was programmed, dial the extension number at which you want the
calls to ring.
Call Forwarding is activated (on a button with lights, the green light is on).
To remove Call Forwarding by using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed on the button, Call
Forwarding is deactivated (on a button with lights, the green light is off). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination extension was programmed, dial your extension number again.
Call Forwarding is deactivated (on a button with lights, the green light is off).
Using Call Forwarding on a Single-Line Telephone 8
To forward your calls:
1. Lift the handset.
You hear intercom dial tone.
2. Press
#11.
3. Dial your extension number.
4. Dial the number of the extension at which you want your calls to ring.