Avaya PARTNER Advanced Communications System - Contact Closure Adjunct

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Contact Closure Adjunct
9-10
Contact Closure Adjunct 9
The Contact Closure Adjunct plugs into a jack on the processor module and has two Contact
Closures to control devices such as an electronic door lock (as shown in Figure 9-5) or an alert.
The device being controlled must be wired to the Adjunct by an electrician in accordance with local
electrical codes.
Program the following features to enable the use of the Contact Closure Adjunct:
■ Contact Closure Group
■ Contact Closure Operation Type
Figure 9-5. Contact Closure Adjunct
Contact
Closure
1
PARTNER
ACS
Ext X
Doorphone
Doorphone
Alert
Extension
Ext Y
Door with
Electronic
Lock
Contact
Closure
Adjunct