Overview
5-1
5
Initial Telephone Programming 5
Overview 5
As the System Administrator, you should program telephones at individual extensions with certain
features. There are two types of telephone programming:
— Centralized Telephone Programming—programming individual telephones from extension
10 or 11.
— Extension Programming—programming an individual system telephone from the
extension to which it is connected.
Use Centralized Telephone Programming to program the features presented in this chapter. You
need a system display telephone for Centralized Telephone Programming.
If you have any 34-button telephones in the system, you must use a 34-button display
telephone to program since an 18-button telephone cannot be used to program a 34-
button telephone. Also, if your system has both PARTNER and MLS telephones, you
should use a PARTNER display telephone at the programming extension.
To Next Page
Loading...
