Avaya PARTNER Advanced Communications System - Direct Line Pickup Features; Using Contact Closure on a System Telephone; Using Contact Closure on a Single-Line Telephone; Direct Line Pickup-Active Line (I68 LL)

Programming & Using Telephone Features
Direct Line Pickup Features
8-33
Using Contact Closure on a System Telephone 8
To activate a Contact Closure:
1. Press the programmed button or press
f41 (for Contact Closure 1) or f42
(for Contact Closure 2).
The green light is on steady.
2. If the Contact Closure Operation Type for that Contact Closure is set to Toggle, repeat Step
1 to deactivate the Contact Closure.
The green light goes off.
Using Contact Closure on a Single-Line Telephone 8
To activate a Contact Closure:
1. Pick up the handset to get an intercom dial tone.
2. Press
#41 (for Contact Closure 1) or #42 (for Contact Closure 2).
3. If the Contact Closure Operation Type for that Contact Closure is set to Toggle, repeat
Steps 1 and 2 to deactivate the Contact Closure.
Direct Line Pickup Features 8
With the Direct Line Pickup features, you can access a ringing or held call or a call in progress.
You can also select a line to use that is not assigned to your telephone. The Direct Line Pickup
features are:
■ Direct Line Pickup—Active Line
■ Direct Line Pickup—Idle Line
Direct Line Pickup—Active Line (I68LL) 8
Use this feature to access a ringing or held call, or to join a call in progress on a specific outside
line (where LL is a system line number).This feature is useful for picking up a ringing or held call or
for joining a call on a line that is not assigned to the telephone.
Considerations 8
■ This feature is useful when you are requested or paged to pick up a call on a specific line that
does not appear on your telephone.
■ You cannot access conference calls by using this feature.
■ You can program a Direct Line Pickup—Active Line button on a system telephone to pick up
a line by pressing the button and then dialing the two-digit line number.