50 Adjustment on the device
The color and state of the Status-LED shows the currently selected mixing type. To select
the desired type tap the rudder stick repeatedly in one direction until the Status-LED
lights in the correct color:
Status-LED Swashplate mixer
purple mechanical
red flashing 90° (3 or 4 servos)
red 120°
blue flashing 140°
blue 135°/140°(1:1)
The Status LED is off in case one of the mixer parameters has been changed manually
from the StudioX app. You can switch back to one of the presets anyway by moving the
rudder stick but note that this will delete your custom setting!
115
To Next Page
Loading...
