Beastx MICROBEAST PLUS - 111 Setup with Studiox

111 Setup with StudioX
When you're using the optional available PROEDITION firmware in combination with
the Bank Switch feature you can set the parameters for the tail gyro and cyclic control
loop in the StudioX app independant for all three flight modes. The dials on the device
have no effect in this case. The auxiliary channel for adjusting the gyro gain is used to
switch between banks (flight modes) instead of adjusting the gyro gain (see the page Bank
Switching
1
for more detailed information).
1
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:BankSwitch/en
259