86 Full throttle position
This page is a translated version
1
of the page Manuals:MBPlusFblV52:Governormenu C
2
and the translation is 100% complete.
At menu point C you have to set full throttle position of your ESC or throttle servo. Here
the output [CH5] can be only controlled by the throttle stick when the RPM Governor
type is set to „nitro“. In „electric“ mode the throttle output will stay locked. So you can
set the full throttle position quite comfortable without the motor running high (we expect
that your maximum stick position actually indicates the maximum throttle position of
your ESC in case your ESC is setup correctly!). Otherwise there are no differences between
the modes „electric“ and „nitro“.
1
https://wiki.beastx.com/index.php?title=Special:Translate&group=page-Manuals%
3AMBPlusFblV52%3AGovernormenu+C&action=page&filter=&language=en
2
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:Governormenu_C
191
To Next Page
Loading...
