66 Setup with StudioXm
Initially the swashplate will be leveled and rotorblades will have 0 degrees of pitch when
the cyclic throw adjustment screen opens. Attach your pitch gauge at the rotorblade or
blade grip, calibrate it to 0.0 degrees and then click the Measure button. This will move
the rotorblade into measuring position. Now check the pitch gauge, we want to see exactly
+-6.0 degrees. Increase/decrease the throw value with the + and - buttons or the dial
until the pitch is adjusted correctly. You can switch back and forth between measure and
zero position as often as you like.
147
To Next Page
Loading...
