Beastx MICROBEAST PLUS - 10 This Is What You Get When Buying the MICROBEAST PLUS HD

10 This is what you get when buying the
MICROBEAST PLUS HD
Figure 22
• the MICROBEAST PLUS HD flybarless unit
• printed Quickstart manual, Quick reference card and
BEASTX sticker set
• all the wires to connect your receiver to the system (wire
length 150mm)
• 3M gyro pads
• plastic tool for adjusting the gain dials
• high power connector and on/off switch
Please note: MICROBEAST PLUS HD is usually sold with BASIC firmware. If you
like, you can upgrade to PROEDITION firmware later using the StudioX PC software or
StudioXm app. Ask your dealer if you need the PROEDITION firmware upgrade installed
already.
23