Beastx MICROBEAST PLUS - 34 Adjustment on the device; Status-LED Swashplate servo frequency

34 Adjustment on the device
To select the desired servo frequency move the rudder stick repeatedly in one direction
until the Status-LED lights in the correct color at SETUP MENU point B:
Status-LED Swashplate servo frequency
purple 50 Hz
red flashing 65 Hz
red 120 Hz
blue flashing 165 Hz
blue 200 Hz
Note: When you set a different frequency using the StudioX or StudioXm App the Status
LED will be off. You can change back to a preset setting by tapping the rudder stick as
described, but this will remove your custom setting!
81