Beastx MICROBEAST PLUS - 9 This Is What You Get When Buying the MICROBEAST PLUS

9 This is what you get when buying the
MICROBEAST PLUS
Figure 21
• the MICROBEAST PLUS flybarless unit
• printed Quickstart manual, Quick reference card and
BEASTX sticker set
• all the wires to connect your receiver to the system (wire
length 150mm)
• 3M gyro pads
• plastic tool for adjusting the gain dials
Please note: MICROBEAST PLUS is usually sold with BASIC firmware. If you like, you
can upgrade to PROEDITION firmware later using the StudioX PC software or StudioXm
app. Ask your dealer if you need the PROEDITION firmware upgrade installed already.
21