Beastx MICROBEAST PLUS - 110 Adjustment at the device; 110.1 Tail gyro: Gyro gain and operation mode

110 Adjustment at the device
The gyro gain and gyro operation mode can be directly adjusted from the transmitter.
The other parameters mentioned above can be set by turning the dials on the device
into a specific position. To adjust the dials please only use the supplied plastic
BEASTX adjustment tool to prevent damage to the dials!
Figure 128 noframe
110.1 Tail gyro
Gyro gain and operation mode
The tail gyro gain is adjusted by one of the transmitter‘s auxiliary channels. The more
servo throw this channel produces, the higher the tail gyro gain will be. Additionally, the
direction of servo throw determines whether the gyro operates in Normal-Rate mode or in
HeadingLock mode.
255