Parameter explanation
Status-LED Cyclic response
red flashing slightly increased
red increased
blue flashing high
blue very high
106.6 Pitch boost (H)
PARAMETER MENU point H allows you to setup the collective pitch boost function. This
function causes that the faster you move the thrust stick, the more additional collective
pitch will be exposed. This can be especially useful in 3D aerobatics when very rapid
collective pitch changes are necessary for certain flight maneuvers, as hereby dynamically
the required control stick deflection will be reduced. However, the maximum pitch value
will not be exceeded.
When the setting is too high, this can cause the rotor blades to stall when giving very fast
collective pitch commands. The collective pitch will feel slow and spongy, precisely causing
the opposite effect as desired. Also note that a high setting can make the pitch control
inprecise and more sensitive, as when giving fast stick input, the pitch will overshoot.
Start from the ”low” setting, gradually increasing to the desired level, until you have found
your ideal setting. How high this feature is adjustable without causing any adverse effects
depends on many factors, such as maximum pitch values, pitch curve, swashplate servos,
main rotor blades, system headspeed, pilot skills, ... .
Status-LED Pitch boost
purple off
red flashing low
red medium
blue flashing high
blue very high
244
To Next Page
Loading...
