2 MICROBEAST PLUS - What's that?
Figure 1
MICROBEAST PLUS is a gyro system which is used to stabilize and control your flybarless
RC Helikopter on all three flight axis. It can be used with many different types of helicopters
like 3D aerobatic helis, F3C competition helicopters as well as scale helicopters with 2 or
more rotorblades. The system comes with basic flybarless stabilization functionality and
can be upgraded by paid update to the ”ProEdition”. This enables additional features like
AttitudeControl for recue bailout or constant leveling and a feature called Bank Switching
which allows to change between different parameter presets in flight to serve different flight
conditions or flying styles.
• wide input voltage range from 4 to 9 Volts
• supports nearly all types of radio systems with conventional receiver wiring as well as lots
of different serial signal receivers like SBUS, XBUS, EXBUS, iBus, UDI, SRXL, SRXL2,
SPPM, SUMD, Spektrum/JR/ALIGN remote satelite
• preset swash plate mixing for mCCPM and 90, 120, 140 eCCPM + fully customizable
swash mixing with up to 4 swash plate servos and virtual phasing for scale helicopters
5
To Next Page
Loading...
