MICROBEAST PLUS - What's that?
• swash plate servo update rate with up to 333Hz
• integrated tail gyro with torque precompensation (”RevoMix”) supports all types of rudder
servos with 760, 960 and 1500(1520)µs pulse width and up to 560Hz update rate
• integrated head speed governor for electric and nitro/gas driven helicopters (requires rpm
sensor pickup or esc with rpm signal output)
• optional upgrade to ”ProEdition” with bank switch feature for full customization and
AttitudeControl for rescue bailout and selfleveling
• MICROBEAST PLUS HD comes with a switchable high power input for large helicopters
with power hungry standard servos and additonal vibration resistance due to aluminum
housing
To setup MICROBEAST PLUS there is no need for any additional devices. All you need
is your radio system and your helicopter. Thanks to the well proven EasySetup system you
can do all the necessary adjustment directly at the device and in very short time. If you like
to get more insight into the system and like to have a more visualized type of setup you can
also use the StudioX App for PC/Mac or StudioXm for your smartphone/tablet in combi-
nation with the USB2SYS interface (PC/Mac) or BLE2SYS interface (smartphone/tablet)
(optional available). These apps are the source to get even more out of your device like
saving/restoring paramaters, firmware updates, loading preset heli configurations and
making advanced adjustment to fully customize your MICROBEAST PLUS to your needs.
6
To Next Page
Loading...
