Beastx MICROBEAST PLUS - Change Pin Code; Firmware Update

BLE2SYS Configuration
130.3 Change pin code
If necessary you can change the pin code for connecting to the BLE2SYS. We highly
recommend to do this as the default pin ”1111” is known to everyone, so it may be very
likely that some moron tries to fool you and connects to your device when on the flying
field or even when you intend to fly!
130.4 Firmware update
When you are using a computer (PC/mac) to configure your BLE2SYS, you will additionaly
see a ”Firmware Update” button. So obviously when you click that button you will be able
to upload latest firmware updates to your BLE2YS interface (if necessary). The update
procedure is not different to any other BEASTX device and is described in the section
Firmware Update
2
.
2
https://wiki.beastx.com/./index.php/StudioXm:FirmwareUpdate/en
312