65 Adjustment on the device
Initially the Status LED will be off, the swashplate will be leveled and rotorblades will
have 0 degrees of pitch. Attach your pitch gauge to the rotorblade or blade grip, calibrate
it to 0 degrees and then tap the rudder stick once. This will move the rotorblades
into measuring position. Now check the pitch gauge. We want to see exactly +-6.0
degrees. By aileron input you can increase/decrease the amount of pitch (left =
decrease, right = increase) until you have reached +-6.0 degrees (the sign/direction of
pitch is not of importance). You can switch back and forth between measuring and zero
position as often as you like. When done tap the button to proceed to the next menu point.
145
To Next Page
Loading...
