117 Bank Switching - What's that?
With Bank Switching you can change between 3 different parameter sets in flight, instead
of using only one fixed parameter set. This allows to adapt the system to different flight
conditions or different rotorhead speeds, i.e. when hovering, cruising, speed flying, landing
and so on. Or you can use the Bank Switching to selectively change specific parameters,
i.e. switch between different rescue modes or test the effects of a parameter. Please note
that due to the variety of setup options it is only possible to enable and setup the bank
switching with the StudioX computer software or StudioXm App for mobile devices.
281
To Next Page
Loading...
