120 Reset to default settings
This page is a translated version
1
of the page Manuals:MBPlusFblV52:FactoryReset
2
and
the translation is 100% complete.
In the following we will describe how to reset your device to factory settings. This
brings all parameters and settings back to the default values as mentioned in the man-
ual and shown on the MICROBEAST PLUS quick reference card
3
(marked with a * there).
Please note: The factory reset will not change your receiver settings (receiver type,
function assignments, failsafe settings). This simply can be changed by doing the
receiver setup procedure in Receiver Menu
4
again.
In case your system does not pass initialization sequence, you will not be able to perform
factory reset on the device as you need to do this in Setup Menu (which is accessed
from operation mode). But doing a reset will not solve this problem anyway! When
you can't pass radio system initialization sequence, make sure to perform
Receiver Menu
5
setup completely!
1
https://wiki.beastx.com/index.php?title=Special:Translate&group=page-Manuals%
3AMBPlusFblV52%3AFactoryReset&action=page&filter=&language=en
2
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:FactoryReset
3
http://www.beastx.com/download/manual/microbeast/MBPlus_QuickReferenceCard_V52_EN.pdf
4
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:ReceiverType/en
5
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:ReceiverType/en
289
To Next Page
Loading...
