137 freakware Network
The firmware files must be downloaded from the freakware network webserver. So for
the update process it is necessary that your computer or mobile device serves an internet
connection. Please note that especially when using mobile data this may produce costs!
We recommend to not use the mobile network and just do the update process at home
where you have (free) wifi. Especially when using a mobile device check that your network
settings and privileges for using the internet are set correctly for the StudioXm app in you
Android or iOS settings. Typically, when your internet is not configured correctly you will
not be able to login to the freakware network and will see an error message when clicking
the ”Firmware Update” button in the app.
Now to get the firmware files, at first you will be prompted to log in to the freakware
network with your login (=email address) and password. If not already done create an
account now. If you have forgotten your password click the corresponding button to
request a new password. The login credentials will be stored, so next time when doing a
firmware update you can skip this step quickly. If you don't like that your password is
saved you can disable the corresponding option.
Choose Firmware Update from the overview
Log in to the freakware network with your credentials or create a new account.
327
To Next Page
Loading...
