102 Setup with StudioX
When StudioX has connected to your MICROBEAST PLUS, in the device overview main
screen click the ”Parameter” button. Click the ”Next” button once in order to change to
the topic ”Bank 1 - Control style”. Here you see the currently used maximum rotation
rates and expo values for each control function aileron, elevator and rudder. The rate is
measured in degrees per second, a value of 360 for example means your helicopter will
make a full turn/rotation in one second, when you move the stick to full deflection. The
expo value is specified in percent. 0% expo means that the stick input is influencing the
output linearly. Usually this will make the control feel very sensitive and over reactive. By
adding some expo you can soften the input around stick center position.
When using the Bank Switch feature you can set different control styles for each bank.
Click ”Next” until you will see ”Bank 2 - Control style” or ”Bank 3 - Control style” and
adjust as necessary or set the values similar to Bank 1 in case you don't like to have
different styles on each bank.
Please note that your custom values of Bank 1 will be changed/deleted when you select
a preset control style in the PARAMETER MENU on the device (see above)!
231
To Next Page
Loading...
