Beastx MICROBEAST PLUS - 54 Adjustment on the device; Status-LED Servo reverse

54 Adjustment on the device
By tapping the rudder stick you can select one servo after another. Every color of the
Status-LED is corresponding to a specific servo channel that is indicating its selection by a
short up and down move. (You can switch back and forth between the servos as often as you
need.) When you tap the aileron stick once, the selected servo will reverse its direction.
Status-LED Servo reverse
purple CH1 – elevator servo
red CH2 – aileron(1) servo
blue CH3 – aileron(2)
red/blue CH7 – elevator servo(2) (90° eCCPM only)
123