Beastx MICROBEAST PLUS - 38 Adjustment on the device; Status-LED Rudder servo center pulse length

38 Adjustment on the device
To select the desired rudder servo pulse width (servo type) move the rudder stick repeatedly
in one direction until the Status-LED lights in the correct color at SETUP MENU point C:
Status-LED Rudder servo center pulse length
purple 760
red 960
blue 1520
Note: When you've set a different pulse width using the StudioXm App the Status LED
will be off. You can change back to a preset setting by tapping the rudder stick as
described, but this will remove your custom setting!
89