100 PARAMETER MENU B - Control
Style
This page is a translated version
1
of the page Manuals:MBPlusFblV52:ControlStyle
2
and
the translation is 100% complete.
MICROBEAST PLUS transfers the stick inputs of roll, elevator and rudder as commands
to rotate the heli with a given speed. When the sticks are in center position this means
”do not rotate”. On the other hand when you move the stick(s) to a specific amount of
full deflection it is not settled how fast the helicopter will rotate. Here comes the control
style setting into play which allows to choose between different control behaviors/control
styles for your helicopter. This includes the maximum rotation rate of the helicopter as
well as how sensitive MICROBEAST PLUS will react to stick inputs for aileron, elevator
and rudder around the stick centre (Stick expo).
Factory setting for this option is ”sport”. This should be suitable for most pilots. If you are
a rather inexperienced model pilot it is absolutely suggested to select the option ”normal”
for the first flights. Here the rotation rate on cyclic and rudder is highly decreased and the
stick inputs around center are very gentle.
Additionally it is possible to freely adjust the control style with StudioX/StudioXm to your
needs and even to store different control styles for the 3 flight modes when using the bank
switch feature (PROEDITION firmware only). So you have the ability to switch between
different styles in flight.
1
https://wiki.beastx.com/index.php?title=Special:Translate&group=page-Manuals%
3AMBPlusFblV52%3AControlStyle&action=page&filter=&language=en
2
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:ControlStyle
227
To Next Page
Loading...
