89 GOVERNOR MENU D - Setting up
the transmitter
This page is a translated version
1
of the page Manuals:MBPlusFblV52:Governormenu D
2
and the translation is 100% complete.
Similar to GOVERNOR MENU point A here we will only get some status information.
At GOVERNOR MENU point D the different activation points of the Governor will
be displayed based on color and state of the Status-LED. So you can prepare your
transmitter for use with the Headspeed Governor function. The information conveyed by
the Status-LED is basically the same in every Governor operation mode. However, the
setup of the transmitter and the range of headspeed will be slightly different, depending
on whether the mode electric or nitro is used.
Governor off = off, Autorotation = purple, Gov active = red or blue (= max. RPM)
When performing the setup with StudioX, you can directly read from the app in
real-time what your activation points are and what your switch on the radio does!
1
https://wiki.beastx.com/index.php?title=Special:Translate&group=page-Manuals%
3AMBPlusFblV52%3AGovernormenu+D&action=page&filter=&language=en
2
https://wiki.beastx.com/./index.php/Manuals:MBPlusFblV52:Governormenu_D
197
To Next Page
Loading...
