Beastx MICROBEAST PLUS - 31 Adjustment at the device; Status-LED Device orientation

31 Adjustment at the device
Select the orientation that the device is actually mounted on your heli by choosing
the suitable Status LED color. You can switch between the options by briefly moving
the rudder stick to one or the other direction. The Status-LED will change the color
accordingly.
Status-LED Device orientation
off flat, sticker on top side, socket points in flight direction
purple flashing vertical, button is on the top, socket points in flight direction
purple flat inverted, sticker on bottom side, socket points in flight direction
red flashing vertical inverted, button is on the bottom, socket points in flight
direction
red flat, sticker on top side, socket points to the tail boom
blue flashing vertical, button is on the top, socket points to the tail boom
blue flat inverted, sticker on bottom side, socket points to the tail boom
red/blue vertical inverted, button is on the bottom, socket points to the tail
boom
75