Adjustment on the device
Menu point G
Status-LED
.YZ Menu point H
Status-LED
blue flashing .80 purple flashing
blue flashing .85 purple
blue flashing .90 red flashing
blue flashing .95 red
When a custom gear ratio was set using StudioX or StudioXm the Status LED will be off
at menu point F. Pressing the button briefly in this combination the menu points G and
H will be skipped and you will directly exit the menu. Other than that also here you can
change the gear ratio with the rudder stick and use one of the preset ratios, but note that
in this case the custom ratio will be erased!
218
To Next Page
Loading...
