4
Setting the Department ID Management
4-9
System Manager Settings
7
Press “OK.”
8
Set the Impression Limit, and press “Done.”
To make the “Impression Limit” set in the step 6 effective, press “Limit Impress.”
“Limit Impress.” cannot be selected for a particular department.
9
Press “OK.”
NOTE
•
When you select “On,” Department ID Management is enabled. (See ‘Entering the
Department ID and Password,’ on p. 1-36.)
E1L_US_U_.book-INDEX Page 9 Wednesday, May 23, 2001 11:40 PM
To Next Page
Loading...
