Administration
Routing Resources
Cisco 500 Series Stackable Managed Switch Administration Guide 112
6
• Maximum Entries—Select one of the following options:
- Use Default—On Sx500 the number of TCAM entries is 25% of the
TCAM size. On SG500X/SG500XG the number of Router TCAM entries
is 50% of the Router TCAM size.
- User Defined—Enter a value.
IPv4 Multicast Routing Resources (for SG500XG and SG500X devices only)
• IPv4 Multicast Routes (2 TCAM entries per route)—Count is the number
of Multicast routes recorded on the device and TCAM Entries is the number
of TCAM entries being used for the Multicast routes.
• Maximum Entries—Select one of the following options:
- Use Default—On Sx500 the number of TCAM entries is 25% of the
TCAM size. On SG500X/SG500XG the number of Router TCAM entries
is 50% of the Router TCAM size.
- User Defined—Enter a value.
IPv6 Routing Resources (for SG500XG and SG500X devices only)
• Neighbors (4 TCAM entries per route)—Count is the number of neighbors
recorded on the device and TCAM Entries is the number of TCAM entries
being used for neighbors.
• Interfaces (8 TCAM entries per route)—Count is the number of interfaces
on the device and TCAM Entries is the number of TCAM entries being used
for the interfaces.
• On Link Prefixes (4 TCAM entries per prefix)—Count is the number of on
link prefixes recorded on the device and TCAM Entries is the number of
TCAM entries being used for them.
• Total—Total number of TCAM entries being used.
• Maximum Entries—Select one of the following options:
- Use Default—On Sx500 the number of TCAM entries is 25% of the
TCAM size. On SG500X/SG500XG the number of Router TCAM entries
is 50% of the Router TCAM size.
- User Defined—Enter a value.
To Next Page
Loading...
Need help?
General
