Cisco 500 Series - Page 161

Administration: Discovery
Configuring LLDP
159 Cisco 500 Series Stackable Managed Switch Administration Guide
9
MED Details
• Capabilities Supported—MED capabilities supported on the port.
• Current Capabilities—MED capabilities enabled on the port.
• Device Class—LLDP-MED endpoint device class. The possible device
classes are:
-
Endpoint Class 1 —Generic endpoint class, offering basic LLDP services.
-
Endpoint Class 2 —Media endpoint class, offering media streaming
capabilities, as well as all Class 1 features.
-
Endpoint Class 3 —Communications device class, offering all Class 1 and
Class 2 features plus location, 911, Layer 2 device support, and device
information management capabilities.
• PoE Device Type—Port PoE type; for example, powered.
• PoE Power Source—Port power source.
• PoE Power Priority—Port power priority.
• PoE Power Value—Port power value.
• Hardware Revision—Hardware version.
• Firmware Revision—Firmware version.
• Software Revision—Software version.
• Serial Number—Device serial number.
• Manufacturer Name—Device manufacturer name.
• Model Name—Device model name.
• Asset ID—Asset ID.
Location Information
• Civic—Street address.
• Coordinates—Map coordinates: latitude, longitude, and altitude.
• ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).