Cisco 500 Series Administration Guide

Security: 802.1X Authentication
802.1X Configuration Through the GUI
503 Cisco 500 Series Stackable Managed Switch Administration Guide
22
Web Authentication Customization
This page enables designing web-based authentication pages in various
languages.
You can add up to 4 languages.
NOTE Up to 5 HTTP users and one HTTPS user can request web-based authentication at
the same time. When these users are authenticated, more users can request
authentication.
To add a language for web-based authentication:
STEP 1 Click Security > 802.1X/MAC/Web Authentication > Web Authentication
Customization.
STEP 2 Click Add.
STEP 3 Select a language from the Language drop-down list.
STEP 4 Select Set as Default Display Language if this language is the default language.
the default language pages are displayed if the end user does not select a
language.
STEP 5 Click Apply and the settings are saved to the Running Configuration file.

Cisco 500 Series Specifications

General

Model	Cisco 500 Series
Category	Switch
Mounting	Rack-mountable
Management	Web-based, CLI, SNMP
Ports	24, 48
Port Speed	10/100/1000 Mbps
PoE Support	Available on some models
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Security	ACLs, 802.1X
Quality of Service (QoS)	Yes
Dimensions	Varies by model
Weight	Varies by model
Humidity	10% to 90% non-condensing
Power Supply	Internal
Power Consumption	Varies by model
Jumbo Frame Support	Up to 9216 bytes