Cisco 500 Series - Page 545

Security: IPv6 First Hop Security
Configuring IPv6 First Hop Security through Web GUI
543 Cisco 500 Series Stackable Managed Switch Administration Guide
23
- ND Inspection State on Current VLAN:—Is ND Inspection enabled on
the current VLAN.
- Device Role:—ND Inspection device role.
- Drop Unsecure:—Are unsecure messages dropped.
- Minimal Security Level:—If unsecure messages are not dropped, what
is the minimum security level for packets to be forwarded.
- Validate Source MAC:—Is source MAC address verification enabled.
• Neighbor Binding Status
- Neighbor Binding State on Current VLAN:—Is Neighbor Binding
enabled on the current VLAN.
- Device Role:—Neighbor Binding device role.
- Logging Binding:—Is logging of Neighbor Binding table events enabled.
- Address Prefix Validation—Is address prefix validation enabled.
- Global Address Configuration:—Which messages are validated.
- Max Entries per VLAN:—Maximum number of dynamic Neighbor
Binding table entries per VLAN allowed.
- Max Entries per Interface:—Maximum number of Neighbor Binding
table entries per interface allowed.
- Max Entries per MAC Address:—Maximum number of Neighbor Binding
table entries per MAC address allowed.
• IPv6 Source Guard Status:
- IPv6 Source Guard State on Current VLAN:—Is IPv6 Source Guard
enabled on the current VLAN.
- Port Trust:—Whether the port is trusted and how it received its trusted
status.