Quality of Service
Configuring QoS - General
Cisco 500 Series Stackable Managed Switch Administration Guide 610
28
The following tables describe the default DSCP to queue mapping for a 8-queue
system where 8 is highest:
To m a p D S C P t o q u e u e s :
STEP 1 Click Quality of Service > General > DSCP to Queue.
The DSCP to Queue page contains Ingress DSCP. It displays the DSCP value in
the incoming packet and its associated class.
STEP 2 Select the Output Queue (traffic forwarding queue) to which the DSCP value is
mapped.
STEP 3 Select Restore Defaults to restore the factory CoS default setting for this
interface.
DSCP
63 55 47 39 31 23 15 7
Queue
7 78 65431
DSCP
62 54 46 38 30 22 14 6
Queue
7 78 65431
DSCP
61 53 45 37 29 21 13 5
Queue
7 78 65431
DSCP
60 52 44 36 28 20 12 4
Queue
7 78 65431
DSCP
59 51 43 35 27 19 11 3
Queue
7 78 65431
DSCP
58 50 42 34 26 18 10 2
Queue
7 78 65431
DSCP
57 49 41 33 25 17 9 1
Queue
7 78 65431
DSCP
56 48 40 32 24 16 8 0
Queue
7 77 87712
To Next Page
Loading...
