Cisco 8811

Table 4: Cisco IP Phone 8800 Administration Guide Revisions for Firmware Release 11.0
Updated SectionRevision
•
VPN Configuration, on page 188
•
Set Up IPv6, on page 56
•
Set Up Energy Efficient Ethernet for Switch
and PC Port, on page 164
•
Video Transmit Resolution Setup, on page 193
•
Enhanced Survivable Remote Site Telephony,
on page 77
Updated for clarification and to address deficiencies
•
Control Debug Information from Cisco Unified
Communications Manager, on page 252.
Updated for improved Sectional phone debug option
support
•
WLAN Security, on page 93.
•
Set Up Authentication Mode, on page 96
•
Wireless Security Credentials, on page 96
Updated for improved EAP-TLS + SCEP,
PEAP-GTC, and X.509 digital certificates support
•
Problem Report Tool, on page 171.
•
Configure a Customer Support Upload URL,
on page 171.
Updated for improved Problem Report Tool(PRT)
support
•
View All Calls on Primary Line.
Added for View All Calls on Primary Line support
•
Application Dial Rules, on page 78
Added for Application Dial Rule support
•
Set the Label for a Line, on page 172.
Added for Line Text Label
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
4
New and Changed Information
New Information for Firmware Release 11.0