Cisco Catalyst 3750 User Manual

2-10
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
archive copy-sw
Examples This example shows how to copy the running image from member 6 to member 8:
Switch# archive copy-sw /destination-system 8 6
This example shows how to copy the running image from member 6 to all the other members:
Switch# archive copy-sw 6
This example shows how to copy the running image from member 5 to member 7. If the image being
copied already exists on the second member’s flash memory, it can be overwritten with the copied one.
The system reloads after the image is copied:
Switch# archive copy-sw /destination-system 7 /overwrite /force-reload 5
Related Commands Command Description
archive download-sw Downloads a new image from a TFTP server to the switch.
archive tar Creates a tar file, lists the files in a tar file, or extracts the files from a tar file.
archive upload-sw Uploads an existing image on the switch to a server.
delete Deletes a file or directory on the flash memory device.

Cisco Catalyst 3750 Specifications

General

Device Type	Switch
Switching Capacity	32 Gbps
Forwarding Rate	38.7 Mpps
Stacking Bandwidth	32 Gbps
RAM	128 MB
Jumbo Frame Support	Yes
Switch Type	Managed
Model	Catalyst 3750 Series
Uplink Interfaces	SFP
Form Factor	Rack-mountable
MAC Address Table Size	12, 000 entries
Routing Protocol	RIP, OSPF, EIGRP
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Layer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)	PoE
Operating Temperature	-5 - 45 °C
Operating Humidity	10% to 85% non-condensing