Cisco D9854 Installation And Configuration Guide

Setup Menu
111
Menu Item
Description
Parameters
ON_ID
Specify the Transport Original
Network ID.
0 to 65535
TS Routing
Select EntireTS to use the CAM to
decrypt the entire transport
stream, or select ServicesOnly to
use the CAM to decrypt only the
PIDs being used by the active
services.
EntireTS or ServicesOnly
Top/Bottom Slot
Menu Item
Description
Parameters
Status
Displays the status of the CAM.
Ready or Not Ready
System Name
Indicates the system name of the CAM.
Application
Manufacture ID
Displays the factory loaded application
number of the CAM.
Manufacture Code
Indicates the manufacture’s code.
Supported CA
System IDs
Displays the CA system identification name
of the CAM. Some CAMs may support
multiple CA system IDs.
Serial Number
Indicates the unique serial number of the
CAM.
Hardware Version
Displays the hardware version number of
the CAM.
Application Version
Displays the software version number of the
CAM.
Company Name
Displays the company name of the CAM.
Product Name
Displays the product name of the CAM.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C