Cisco D9854 Installation And Configuration Guide

Chapter 4 Front Panel Operation
136
Menu Item
Description
Parameters
Use Inp
Chan/PMT/PIDs
Set to Yes to use the input
channel numbers, PMT PID
numbers, and/or ES PID
numbers. Otherwise, set to No
to use the Start channel and
channel Step assigned below.
Yes or No
Start
First PE channel to use if the
Use Inp Chan/PMT/PIDs is set
to No.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Step
Offset of the subsequent PE
channel, PE PMT PID, or first
ES PID of subsequent channel
numbers.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Use Inp Ord
Set to Yes to assign the ES PID
according to the incoming PMT
order. Otherwise, set to No to
use reserved PIDs defined
below.
Yes or No
PCR, VID, AUD,
SUBT, VBI, DPI,
MPE, TTX, Data,
LSD, CDT, ETV
Set the number of PIDs for the
specified streams in one
channel.
1 to 64

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C